These Retro Fit wheel nuts are vital when securing your Alcoa® Wheels to the hub. They are available in 2 different sleeve lengths and are a genuine product supplied by Alcoa® Wheels.
The short-sleeved wheel nut has a sleeve length of 8mm and must only be used for the single fitment of an Alcoa® Wheel.
The long-sleeved wheel nut has a sleeve length of 18mm and should be fitted when there is twin fitment (when wheels are fitted to the outer and inner of an axle) of an Alcoa® Wheel.
PLEASE NOTE: The long-sleeved wheel nuts only go through the outside wheel rather than both wheels. The previous design of this length wheel nut had a sleeve length of 34mm however the threaded part is exactly the same length.
Please choose the correct sleeve length when adding the product to your bag.
*FITMENT GUIDES ARE AVAILABLE BY REQUEST
The wheel nuts are very high quality and are produced by TekFor for Alcoa® Wheels. They are Geomet® coated to help prevent corrosion and have a nice silver-grey colour to them.
The washer design improves retention and clamping force and the washer to nut contact surface is designed and manufactured to reduce friction to a minimum.
These Retro Fit Wheel nuts must only be used with 22.5 Alcoa® Wheels with the 32mm stud hole.
The Wheel nuts are available in Boxes of 20.
These are available to order with the Alcoa Retro Fit Wheel Nut End Caps for an additional £2 plus VAT. If you require the Alcoa Retro Fit Wheel nut end caps, please choose the option when adding the product to your bag.
It is extremely important to ensure you choose the correct thread pattern for the vehicle they are to fit. For other types of wheel nuts to fit other vehicles, please see other product listings.
To purchase the Alcoa® Wheels inserts separately then please see separate product listing.
